Complete LFA Elite Glock® 17 Compatible Slide - Black w/ Stainless, Black, Threaded or Non-Threaded Barrel + Holosun 507C-X2

Finish your PF940V2 build with a custom, optic-ready slide.

Completing your PF940V2 build is easier than ever with this custom optic-ready slide kit from LFA Elite. Featuring a black powdercoated slide with a pre-cut RMR footprint, and high-quality black or stainless barrel (available with or without threads), this slide kit provides accuracy, reliability, and red dot compatibility for your assembled 80% frame.

This kit also includes a Holosun 507C-X2, one of the most popular handgun red dot optics on the market today. Paired with this slide and your finished frame, your Pf940V2 build will look good, provide high accuracy, and offer quick target acquisition with quality components.

Optional Holosun Red Dot (X2 MRS)

Besides the ability to lock in your desired settings, the X2 MRS also features Holosun's "shake awake" feature, to turn it on when it senses motion. It also comes with solar failsafe, so you can worry less about having a dead battery, a multi-reticle system, 12 brightness settings, and Holosun’s Super LED with up to 50,000 hours of battery life. See below for additional details.

Additional Info:

• MRS: Circle Dot; 2 MOA Dot; 32 MOA Circle
• Up to 50,000 Hours Battery Life (Setting 6)
• 12 Brightness Setting: 10 DL & 2 NV Compatible
• Convenient Tray Battery Compartment
• Parallax-free & Unlimited Eye Relief
• Compatible with RMR cut slides

What's Included:

• Firing pin
• Firing pin spring
• Firing pin spring cup
• Firing pin safety
• Firing pin safety spring
• 9mm Extractor
• Extractor depressor plunger
• Extractor depressor plunger spring
• Channel liner
• Spacer Sleeve
• Steel cover plate
• Polymer guide rod (guide rod, washer, screw)
• Guide rod spring
• Holosun red dot

Custom Optic-Cut Slide

The included slide allows for quick and easy completion of your 80% pistol build with a custom unit that features an RMR optic cut. Machined serrations allow for easy handling and control, while a 416 stainless steel billet construction features machining to factory specifications.

• Heat treated to 41-44 on the Rockwell C scale
• Rustproof matte black powercoat
• Factory internal dimensions
• Factory Glock®-compatible sight cuts
• For Polymer80 and Gen 3 pistols

Gen 3 Barrel

Made with proper US craftsmanship, this Gen 3 barrel boasts the highest level of quality and accuracy you’ll ever find in any full-sized pistol. Manufactured from heat-treated 416R stainless, this Gen3 barrel will guarantee consistent shop shot groups and accuracy when it counts most.

• Rifled with 1:10 rate of twist
• Choose black nitride or stainless finish
• Choose threaded (1/2x28) or non-threaded

Slide Kit Instructions

Assembling your custom GLOCK® slide takes 15 to 30 minutes, and requires a few basic tools:

• Channel Liner Tool
• Small Punch Set
• Gunsmith Hammer

Follow our written instructions, or watch our how-to video:

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a 80-lower.com nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.