Glock® 43 Compatible Pistol Build Kit w/ Black Slide

Statistically, for the vast majority of "gunfights," that is to say for the vast majority of life-and-death situations you could find yourself in where you need to defend either your own or someone else's life with a sidearm, the defender doesn't fire more than six shots. Real life isn't the same as the movies and TV. You're not gonna stand there and empty an entire double-stack mag into your assailant, and the average civilian doesn't need to carry as much "firepower" as they've been led to believe they do by movies and TV. With this in mind, a single-stack pistol would suit most of us just fine. They're a lot slimmer and conceal easier anyway.

So check this out. This build kit when you combine it with either an OEM frame, a Polymer80 single stack, or a SS80 single stack 80% frame, will produce a Glock® 43 compatible 9mm sidearm with a black slide that comes pretty damned close to OEM save for the 80% frame you choose to go with it and then finish yourself. It includes a complete upper parts kit as well as a complete lower parts kit. Upon completion, all you'll need are the sights of your choice and of course mags and ammo. With this kit, please specify whether you'd like your barrel finished in black nitride or stainless steel. See below for more info.

NOTE: This build kit gives you the option to select either a fluted black barrel or a stainless steel barrel with your kit.

Glock® 43 Compatible Slide

• Heat treated from 416R stainless steel
• Heat treated to RC 38-42
• Internal dimensions meet OEM specs
• Fits Glock® 43 and 43X compatible
• Works with Glock® OEM, Polymer80, and SS80 frames
• Uses standard OEM front and rear sights
• Rear serrations are cut deeper for better grip and traction
• Made for gens 1-4
• 9mm

Upper Parts Kit for Glock® 43

• 100% Made in the USA
• Extractor
• Recoil/Guide Rod Assembly
• Firing Pin Assembly
• Slide Cover Plate
• Depressor Plunger
• Firing Pin Safety/Safety Spring

Lower Parts Kit for Glock® 43

• Connector
• Slide Stop Release with Spring
• Magazine Release (May be extended depending on inventory)
• Magazine Release Spring
• Slide LockSlide Lock Spring
• Trigger Housing Pin
• Trigger Housing with Ejector (may be from P80 depending on inventory)
• Trigger Pin
• Trigger Spring
• Trigger with Trigger Bar

AlphaWolf Barrel For M/43 9mm Stock Length

• Fits Glock 43 models only
• Designed for lead, plated, or jacketed ammunition
• Certified, stress relieved 416 stainless steel
• Button rifled, three stage honed bore
• Industry recognized SBN premium coating (SBN is Salt Bath Nitride, similar to Tennifer)
• Heat treated to RC 40-42, then SBN coating increases surface hardness to RC 60
• Exacting tolerances allow for drop in installation
• Fluting creates path for heat and debris to escape

Double Diamond Standard Glock® 43 Compatible 9mm Barrel (Stainless)

• Ready to use, pre-fit, drop-in
• No gunsmithing required
• Precision machined from heat treated 416R stainless forgings
• Oversized lock-up area produces greater shot-to-shot accuracy
• Tighter than factory spec dimensions
• Match grade broach cut rifling and target crown
• Maximum chamber support
• Improved feed ramp design
• Diamond turned exterior
• Okay to use lead, plated or jacketed bullets
• Fits Glock® gen 1-4 (does not fit gen 5)

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a 80-lower.com nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.