Polymer80's popular jigs are back! The PF940C 80% Jig Kit provides the guides and bits necessary for cutting and drilling the original PF940C (GLOCK® 19-compatible) 80% frame.
You'll need this jig to cut and drill your P80 frame blank, making it ready for assembly with a GLOCK 19 Build Kit.
The jig is made from a tough fiber-nylon composite, which allows you to use it to complete up to three frames.
The Polymer80 PF940C Jig includes:
- (1) two-sided jig
- (1) 3mm drill bit
- (1) 4mm drill bit
(You'll Need These Tools)
The Polymer80 Frame Jig includes the bits required for drilling your parts kit's pin holes. You will need other tools (sold separately) to drill the pin holes, trim and sand the slide rails, and cut the barrel seat.
- Handheld Dremel
- Drill Press or Hand Drill
- Carbide Burr Dremel Bits
- Hand Files or Sandpaper
"Does this jig work with other 80% frames?"
No. The PF940C Jig only works with the original PF940C 80% frame and the updated PF940C "ATF Compliant/Bridge" 80% Frame. Due to physical diferences in frame sizes, other P80 frames are not compatible with this jig.
We sell all the other jigs designed for Polymer80's other frame blanks:
WARNING: Handling firearms parts and accessories can expose you to lead and other petroleum products known to the State of California to cause cancer and reproductive harm. For more information go to: www.P65Warnings.ca.gov
Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or "assault weapons" (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily.
80-Lower.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally.
