Showing all 3 results
Ready for a red dot or suppressor. Classic Ameriglo quality. The GL-329 ( XL / “Tall”) 3-dot sights provide excellent target aqcuisition in any conditions. That’s thanks to their stacked, Tritium-illuminated front and rear posts. With a front blade height of 0.315″ (8mm) and a rear blade of 0.394″ (10mm), the GL-329s are ready for…
Low-profile OEM Rear Night Sight for your favorite carry pistol. The GLOCK® 42 and 43 provide excellent concealment and reliability, and GLOCK’s® OEM rear night sight — tailored specifically for these small slides and frames — is no different. Filled with genuine Tritium, the G42/43 Rear Night Sight provides up to 12 years of reliable…
GLOCK’s® adjustable factory rear sight. Includes adjustment tool. Dialing in your finished Polymer80 or factory GLOCK® is now easier, thanks to the OEM adjustable rear sight. With bright white target lines and an easy-to-adjust set screw, the factory rear sight provides a reliable zero with a clear sight picture. The factory GLOCK® adjustable rear sight…
Quality GLOCK® sights for factory pistols and G80 builds.
Want to improve your GLOCK’s accuracy and sight picture? Finishing the slide on your G80 or P80 build? We’ve got you covered with quality iron sights for your favorite striker-fired pistol. Grab a set of tritium Ameriglo GLOCK sights for low light, or stick with the factory three-dot setup.
Installing your new sights is easy. Each front sight includes the correct threaded bolt, and all available rear sights interface with factory and aftermarket slides, thanks to a universal press-fit Dovetail connection. Just grab a small polymer gunsmithing hammer and vise with grips to make the job easier. Check out our gunsmithing tools here.
Available sights fit some or all generations of GLOCK-pattern slides, including the slides we sell for G80 and P80 builds. Check the listed fitment on each sight’s page before ordering.
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80% Lowers, a/k/a 80-lower.com nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At 80-Lower.com, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.
