Showing all 4 results
You’ve decided your gen 1-4 double-stack Glock® Compatible pistol’s trigger performs well enough; you just wish it was a touch smoother and maybe a tiny bit lighter. Good, we can help you out with the Glock® Compatible 6.0 lb Trigger Spring for your gen 1-4 shooter. Though it seems counterintuitive, if you want a lighter…
If you’re looking to squeeze some extra performance out of your double-stack Glock® compatible trigger experience, then check this out. This is the Glock® Compatible Basic Pyramid Trigger. It works with all your double-stack Glock® compatible models. The Glock® Compatible Basic Pyramid Trigger’s yields a noticeable increase in your trigger’s performance, because it’s coated in…
Look, the fact is Glock® compatible pistols still fit into the category of “most customizable pistols around.” You can upgrade, replace, or otherwise swap out every damned part on one. But before you trick yours out to truly make it unique to you, start with an upgrade that makes sense, and more importantly, will eventually…
Look, the Glock® 43 (or Glock® 43 compatible) pistol, despite still being relatively new, still fits into the category of “most customizable pistols around.” You can upgrade, replace, or otherwise swap out damn near every part on one. But before you trick yours out to truly make it unique to you, start with an upgrade…
Upgrade your Polmyer80 pistol with a high-performance trigger.
These Gen 3 GLOCK®-compatible triggers and trigger components are a quick and easy way to improve the reliability and accuracy of your pistol. Simply swap out your factory trigger assembly, reuse your existing trigger pin, and you’re ready to go.
These high-performance “Pyramid” series triggers dramatically improve accuracy and trigger feel — something every striker-fired handgun can benefit from. The Pyramid triggers reduce trigger travel to ignition and overtravel after ignition. Reducing travel means less time is spent trying to maintain sight alignment before the round leaves the tube. Reducing overtravel promotes more consistent shot groups by affording quicker resets.
These gold-coated trigger bars aren’t just for good looks. Titanium nitride coatings like these provide natural lubrication and reduce friction between the trigger bar, connector, and trigger mechanism housing. This promotes a smoother, more consistent trigger pull that won’t suffer carbon fouling like a bar stainless assembly.
All upgraded trigger components here fit factory Gen 3 GLOCK® pistols and G80 builds, as well as P80 frames you already own. Add an upgraded trigger while you build your Glock-compatible kit and feel the difference the first day you hit the range.
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80% Lowers, a/k/a 80-lower.com nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At 80-Lower.com, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.
