Complete GLOCK® 19 Compatible Pre-Assembled Slide – RMR Optic Cut – Black Nitride

Description

Pre-Assembled GLOCK® 19 Compatible RMR Slide [Slide + Barrel + Upper Parts Installed]

Skip the punches and the channel liner tool. This G19 slide shows up fully assembled, with a Gen 3 upper parts kit installed and a polygonal-rifled, Black Nitride barrel already in place, so all that’s left is adding sights and dropping it on your frame. The 416 stainless slide wears a tough Black Nitride finish, front and rear serrations, and an RMR optic cut ready for the red dot you’ve been eyeing. Made and assembled in the USA.

Compatibility

Fits GLOCK® 19 Gen 3 compatible frames, including factory Gen 3 G19 pistols and compact 80% frames built to Gen 3 G19 specs. Accepts GLOCK®-pattern sights and RMR-footprint optics.

Optics and RMR Cut Fitment

The RMR footprint is the most widely supported pistol optic cut out there, so you won’t be stuck hunting for adapter plates. Mount a Trijicon RMR, a Holosun (like the 507C X2), a Swampfox, or any other RMR-pattern red dot directly to the G19 slide with the included 6-32 tapped holes.

What’s Included:

Slide

Machined from 416 stainless steel billet to GLOCK® OEM internal dimensions, then heat treated and finished in a durable Black Nitride. Front and rear serrations give you positive grip for press checks and manipulations, factory sight cuts accept standard GLOCK®-pattern irons, and the RMR optic cut is ready for your red dot.

• Platform: GLOCK® 19 Gen 3
• Caliber: 9mm
• Material: 416 Stainless Steel
• Hardness: 42-44 HRC
• Finish: Black Nitride
• Features:
  • OEM internal dimensions
  • RMR optic cut w/ 6-32 tapped holes
  • Front & rear serrations
  • Factory GLOCK® sight cuts

Barrel

The pre-installed barrel is cut from 416R stainless, heat treated to 42-44 HRC, and Black Nitride coated by H&M Precision. Polygonal rifling handles both lead and plated or jacketed projectiles, the flush-cut crown sits clean with the end of the slide, and a serrated, milled lug trims weight without giving up strength.

• Caliber: 9mm
• Length: GLOCK® 19 (Flush Cut)
• Twist Rate: 1:10
• Rifling: Polygonal
• Material: 416R Stainless Steel
• Hardness: 42-44 HRC
• Finish: Black Nitride (H&M Precision)
• Lug: Serrated & Milled

Pre-Installed Upper Parts

• Firing pin
• Firing pin spring
• Firing pin spring cup
• Firing pin safety
• Firing pin safety spring
• 9mm Extractor
• Extractor depressor plunger
• Extractor depressor plunger spring
• Channel liner
• Spacer sleeve
• Steel cover plate
• Polymer guide rod (guide rod, washer, screw)
• Guide rod spring

Ready to Install

Every component comes installed and function-ready from the factory. No assembly required; just add sights (and an optic if you’re running one), then install the slide on your frame. Sights, optic, and frame are sold separately.

Complete Your Build

• GLOCK® 19 Compatible Lower Parts Kit (Gen 1-3)
• Pistol Red Dots
• GLOCK® Sights
• GLOCK® 19 Magazines

Need the frame parts too? Grab the GLOCK® 19 Compatible Pistol Build Kit w/ Pre-Assembled RMR Optic Cut Slide, which pairs this slide with a complete lower parts kit.

 

---

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80% Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.