Still building on a P80 (Polymer80) frame? Polymer80 frames are out of production, but we sold tens of thousands of them. Everything below fits the P80 frames our customers already own: slides, complete slide kits, lower parts kits, barrels, triggers, sights and magazines. Match your frame to its GLOCK® model, then shop that model’s parts.
| P80 frame | Takes GLOCK® parts for | Size |
|---|---|---|
| PF940C | G19 (also G23, G32, G38) | Compact |
| PF940v2 | G17 (also G22, G24, G31, G34, G35) | Full size |
| PF940SC | G26 (also G27, G33) | Subcompact |
| PF9SS | G43 | Single stack |
| PF45 | G21 (also G20) | Full size, large frame |
P80 frames use Gen 3 GLOCK® parts and need a locking block, which isn’t included in our lower parts kits.
We no longer sell P80 frames. The G80 is the Glock-compatible frame that replaced it: a steel receiver with the locking block and slide rails built in, a swappable grip module, and it takes the same Gen 3 G19 slides and G19 lower parts kit. See P80 vs G80 for the full comparison.
G80 Next Build Kit [Receiver + Grip] Already have a jig from your first build? This one’s for repeat builders — just the receiver and grip module, so you’re not paying for a jig you already own. Same steel FCU, same drop-in ready grip, same quality, at a price that makes your second build (or…
G80 Polymer Jig Build Kit [Receiver + Grip + Polymer Jig] Everything you need to go from raw steel to finished FCU, in one box. The G80 Build Kit pairs the unfinished receiver with the polymer clamshell jig and a grip module — all engineered to work together, so you’re not chasing down compatibility issues…
G80 Unfinished Receiver with Pins and Slide Lock Spring This is where your build starts. The G80 Unfinished Receiver is a precision-machined steel fire control unit — locking block, trigger housing, and slide rails cut from one solid piece of heat-treated 4140 steel giving it extra strength and reliability over the 80% polymer frames of…
G80 Grip Module Holster-ready and built for feel, the G80 Grip Module delivers proven GLOCK® G19 Gen3 ergonomics in a sleek, purpose-built housing. Your G80 Receiver drops straight in through the standard front and rear pins, no special tools needed, and the grip runs standard GLOCK® Compact magazines across 9mm, .40 S&W, and .357 SIG….
Showing 1–32 of 77 resultsSorted by popularity
The PMAG G19 15rd magazine is just one of many of Magpul’s line forward-thinking firearm accessories. This 9mm magazine is made from polymer, so it is tough enough to take a beating while still being one of the lightest mags in the market, and also contains a 15th round witness hole. One of the main…
So you wanna build a Gen 1-3 Glock® 19 compatible compact-sized pistol. You got your Glock® 19 compatible Gen 1-3 compact frame, and now you need the guts to put in it to make it work. No need to scour every corner of the internet to Frankenstein something together. You can stop looking here and…
The Magpul PMAG 17rd magazine is a surprisingly high quality magazine that can easily outperform those in higher price points. Being made from polymer, this magazine is lightweight and incredibly durable with a 17th round witness hole to check for a full mag. Its floorplate is also very simple to remove, giving you quick access…
So you wanna build a 3rd gen Glock® 17 compatible full-sized pistol. You got your Glock® 17 compatible 3rd gen full-sized frame, and now you need the guts to put in it to make it work. No need to scour every corner of the internet to Frankenstein something together. You can stop looking here and…
GLOCK’s® adjustable factory rear sight. Includes adjustment tool. Dialing in your finished Polymer80 or factory GLOCK® is now easier, thanks to the OEM adjustable rear sight. With bright white target lines and an easy-to-adjust set screw, the factory rear sight provides a reliable zero with a clear sight picture. The factory GLOCK® adjustable rear sight…
If you’re going the 80% route and building yourself a gen 3 Glock® 19 compatible pistol, then you need an upper parts kit to match. So let us help you out. This Glock® 19 Compatible Upper Parts Kit is exactly what you need. It includes all the necessary internal parts to turn that mid-sized chunk…
If you’re going the 80% route and building yourself a gen 3 Glock® 17 compatible pistol, then you need an upper parts kit to match. So let us help you out. This Glock® 17 Compatible Upper Parts Kit is exactly what you need. It includes all the necessary internal parts to turn that full-sized chunk…
This RMR Cover Plate fits all OEM and aftermarket GLOCK® 17, G19, and Polymer80-equivalent slides that feature a Trijicon RMR optic cut. The screw holes line up with the holes drilled for your slide’s optic. Cover Plate Features 100% Made and coated in the USA 7075-T6 forged aluminum construction Cerakoted in Matte Black Cover Plate…
Got the urge to enhance the performance of your Glock® 17 compatible build even further by using a threaded barrel, so you can screw on a muzzle device? Or perhaps you’ve got a can picked out or are planning to “DIY” a solvent trap? First off, we’re not cheering you on if you’re planning to…
Black Nitride 9310 Steel Thread Protector for Threaded 9mm GLOCK®-Compatible Barrels Take the compensator or suppressor off a threaded 9mm barrel and the exposed threads become the most fragile part of your pistol. One knock against a bench, the edge of a holster or the inside of a range bag can flatten a thread and…
This RMR Cover Plate fits all OEM and aftermarket GLOCK® 17, G19, and Polymer80-equivalent slides that feature a Trijicon RMR optic cut. The screw holes line up with the holes drilled for your slide’s optic. Cover Plate Features 100% Made and coated in the USA 7075-T6 forged aluminum construction Cerakoted in Flat Dark Earth Cover…
Ready for a red dot or suppressor. Classic Ameriglo quality. The GL-329 ( XL / “Tall”) 3-dot sights provide excellent target aqcuisition in any conditions. That’s thanks to their stacked, Tritium-illuminated front and rear posts. With a front blade height of 0.315″ (8mm) and a rear blade of 0.394″ (10mm), the GL-329s are ready for…
Got the urge to enhance the performance of your Glock® 19 compatible build even further by using a threaded barrel, so you can screw on a muzzle device? Or perhaps you’ve got a can picked out or are planning to “DIY” a solvent trap? First off, we’re not cheering you on if you’re planning to…
A compensator that reduces muzzle rise and recoil. Compensators can dramatically improve accuracy by reducing muzzle rise – but they all suffer from the same problem: They add mass to the GLOCK’s® barrel, which increases inertia, reduces cyclig rates, and adds momentum to the barrel during recoil. The Mass Driver Compensators from Strike Industries complete…
Replace that worn out barrel of your your gen 1-4 Glock® 19 or mid-sized Glock® compatible 19 pistol with this G19 barrel. Made with proper US craftsmanship, this Gen3 barrel boasts the highest level of quality and accuracy you’ll ever find in any full-sized pistol. Manufactured from heat-treated 416R stainless, this gen 1-4 barrel will…
See every round at a glance with a clear-sided 7-round magazine for your Glock® 43, plus a Pearce grip extension. Knowing how many rounds you have left matters. This ETS magazine is molded from clear polymer, so you can check your ammunition with a quick look instead of guessing, all without giving up the reliability…
Ported, serrated, RMR optic ready G17 compatible build kit Tired of running a boring factory slide on your G17 frame? Upgrade your slide with this LFA Elite GLOCK® 17 Compatible slide finished in a Flat Dark Earth cerakote, complete with a threaded or non-threaded barrel of your choice. This kit comes with everything you need…
You’ve decided your gen 1-4 double-stack Glock® Compatible pistol’s trigger performs well enough; you just wish it was a touch smoother and maybe a tiny bit lighter. Good, we can help you out with the Glock® Compatible 6.0 lb Trigger Spring for your gen 1-4 shooter. Though it seems counterintuitive, if you want a lighter…
G17 compatible. OEM Rear Serrated. Cerakoted in FDE. This GLOCK® 17-compatible slide provides OEM fitment and reliability, with some key upgrades. Its Flat Dark Earth Cerakote finish provides complete rustproofing and incredible wear resistance for thousands of rounds, while deep-cut front and rear serrations provide extra grip for racking and press checks. It’s also forged…
Grab this rear-serrated black slide kit and finish your G17 build. This front and rear-serrated G17 slide provides all the “upper” components you need to finish your build. With a rustproof matte black finish and your choice of quality threaded or non-threaded barrel, your new Glock® 17 handgun will afford excellent accuracy, reliability, and good…
Factory fitment, with a rugged Cerakote finish. This GLOCK® 43-Compatible slide works with the PF9SS 80% frame. Front and rear serrations make for easy chambering and press checks, as the matte Flat Dark Earth Cerakote finish provides complete protection against rust, carbon fouling, and solvents. Factory-style iron sight mounts make installing a pair of GLOCK®…
Low-profile OEM Rear Night Sight for your favorite carry pistol. The GLOCK® 42 and 43 provide excellent concealment and reliability, and GLOCK’s® OEM rear night sight — tailored specifically for these small slides and frames — is no different. Filled with genuine Tritium, the G42/43 Rear Night Sight provides up to 12 years of reliable…
Enhance your trigger’s action in your single-stack Glock® or Glock® compatible build. “Swap the slop” of the OEM trigger pull to make your trigger feel smooth and lighter and give it a crisper reset. This is the Edge Connector from Ghost Inc. for your Glock® 42, 43, 43X and 48 compatible models. It’s a simple…
Got the urge to enhance the performance of your Glock® 19 compatible build even further by using a threaded barrel, so you can screw on a muzzle device? Got the urge to enhance its aesthetics too by making it a stainless steel finish? Or perhaps you’ve got a can picked out or are planning to…
Let us help you give your Glock® 43 build the most important part of the upper half. This high-quality Glock® 43 compatible barrel, made from certified stress-relieved 416R stainless steel, has undergone the salt-bath nitride process for that smooth black sheen. The barrel itself is fluted to give it a touch of aesthetic appeal too….
G19 compatible. RMR optic cut. Ported and serrated. Finished in FDE Cerakote Looking to give your GLOCK® 19-compatible slide a fresh new look? This LF19 Elite slide offers plenty of upgrades over any OEM-spec slide. Featuring an RMR optic cutout with top ports and side vents giving you the freedom to add your favorite red…
Gen 3 GLOCK® 19 compatible. RMR optic cut. Front & rear serrated. Elite series cerakote. Complete your Gen 3 G19 compatible build, or upgrade your stock GLOCK® 19! This custom-machined slide features an RMR optic cut for better target acquisition and improved accuracy. With a Flat Dark Earth Cerakote finish to improve wear and corrosion…
Having a threaded barrel on your 9mm GLOCK® or P80 pistol doesn’t mean you have to have a muzzle device or suppressor attached at all times. Sometimes you find a reason to take the attachment off the end of the barrel. When that happens, it’s smart to keep those barrel threads covered up, so you…
Give new life to your G17-compatible frame with this GLOCK® 17 OEM style slide. It functions as reliably as an OEM slide, because it is machined to OEM factory specs. The incredibly tough, ceramic-like finish provides unparalleled abrasion and scratch resistance. That means your slide will continue looking great, with minimal holster wear, even if…
GLOCK® 21 and P80 compatible. Fluted for weight savings. Fully polished stainless. There’s a lot of quality packed into this little G21-compatible barrel. It’s been forged from high-quality 416R stainless steel, cut and fluted to reduce weight, then polished inside and out. With a standard 1:10 twist rate and polished feed ramps, this fluted barrel…
Factory-style G-19 Compatible 9mm slide finished in FDE Cerakote This GLOCK® 19-compatible slide provides an OEM upgrade, featuring a Cerakote Flat Dark Earth finish for improved wear and rust resistance. Machined with factory-style, vertical rear serrations. Cut from 416R stainless and heat treated to improve hardness and further improve long-term wear resistance. GLOCK® 19 Slide…
For those of us who get down and dirty with our double-stack Glock® compatible pistols, we have to take extra care of our sidearms, lest we have to spend more time cleaning the crap out of ’em after a good training session or duty. Too much debris inside, too much filth and grime build-up, and…
Do you still sell P80 frames? No. Polymer80 frames are out of production. For a new build, see the G80.
Will a GLOCK®-compatible slide fit my P80? Yes, if it matches your frame’s model and is Gen 3 pattern. A PF940C takes a G19 slide, a PF940v2 a G17 slide, and a PF9SS a G43 slide.
Which lower parts kit do I need? The kit for your frame’s GLOCK® model: G19 for the PF940C, G17 for the PF940v2 and G43 for the PF9SS. See GLOCK® lower parts kits.
Do I need a locking block? Yes. P80 frames need a locking block, and our lower parts kits don’t include one.
Do these parts also fit the G80? Most do. Gen 3 G19 slides, complete slide kits and the G19 lower parts kit fit the G80, which has its locking block built in.
Looking for a Polymer80 AR-15 lower? Those are discontinued too. See our aluminum AR-15 80% lowers.
Guides: 80% Frame Compatibility Guide · P80 vs Glock Frames · P80 vs G80
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80% Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At 80-Lower.com, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.
