GLOCK® 19 Compatible Pistol Build Kit w/ Pre-Assembled RMR Optic Cut Slide – Black Nitride

Description

GLOCK® 19 Compatible Pistol Build Kit [Pre-Assembled RMR Slide + Lower Parts Kit]

Finished your frame and ready to put it all together? This kit takes the slide work off your plate. You get a fully assembled G19 slide, with the barrel and Gen 3 upper parts already installed, plus a complete lower parts kit for the frame. Drop in the frame parts, add sights, mount the slide, and you’re headed to the range. The 416 stainless, Black Nitride slide carries front and rear serrations and an RMR optic cut for your red dot.

Compatibility

Built for GLOCK® 19 Gen 3 compatible frames. The included lower parts kit fits GLOCK® 19 Gen 1-3 compatible frames, and the slide accepts GLOCK®-pattern sights and RMR-footprint optics.

Optics and RMR Cut Fitment

The RMR footprint is the most widely supported pistol optic cut out there, so you won’t be stuck hunting for adapter plates. Mount a Trijicon RMR, a Holosun (like the 507C X2), a Swampfox, or any other RMR-pattern red dot directly to the G19 slide with the included 6-32 tapped holes.

What’s Included:

Slide

Machined from 416 stainless steel billet to GLOCK® OEM internal dimensions, then heat treated and finished in a durable Black Nitride. Front and rear serrations give you positive grip for press checks and manipulations, factory sight cuts accept standard GLOCK®-pattern irons, and the RMR optic cut is ready for your red dot.

• Platform: GLOCK® 19 Gen 3
• Caliber: 9mm
• Material: 416 Stainless Steel
• Hardness: 42-44 HRC
• Finish: Black Nitride
• Features:
  • OEM internal dimensions
  • RMR optic cut w/ 6-32 tapped holes
  • Front & rear serrations
  • Factory GLOCK® sight cuts

Barrel

The pre-installed barrel is cut from 416R stainless, heat treated to 42-44 HRC, and Black Nitride coated by H&M Precision. Polygonal rifling handles both lead and plated or jacketed projectiles, the flush-cut crown sits clean with the end of the slide, and a serrated, milled lug trims weight without giving up strength.

• Caliber: 9mm
• Length: GLOCK® 19 (Flush Cut)
• Twist Rate: 1:10
• Rifling: Polygonal
• Material: 416R Stainless Steel
• Hardness: 42-44 HRC
• Finish: Black Nitride (H&M Precision)
• Lug: Serrated & Milled

Pre-Installed Upper Parts:

• Firing pin
• Firing pin spring
• Firing pin spring cup
• Firing pin safety
• Firing pin safety spring
• 9mm Extractor
• Extractor depressor plunger
• Extractor depressor plunger spring
• Channel liner
• Spacer sleeve
• Steel cover plate
• Polymer guide rod (guide rod, washer, screw)
• Guide rod spring

Frame Parts Kit Includes:

• Connector
• Slide Stop Release with Spring
• Locking Block Pin
• Magazine Release
• Magazine Release Spring
• Slide Lock
• Slide Lock Spring
• Trigger Housing Pin
• Trigger Housing with Ejector
• Trigger Pin
• Trigger Spring
• Trigger with Trigger Bar

This kit is not a firearm. This GLOCK® build kit includes a pre-assembled slide (slide, barrel, guide rod with spring, and upper parts installed) and a frame parts kit. It does not include a frame, locking block, sights, or magazine.

Sold Separately:

• Stripped Frame
• Pistol Red Dot
• Magazine
• Iron Sights

Already have a lower parts kit? The Complete GLOCK® 19 Compatible Pre-Assembled Slide is available on its own.

 

---

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80% Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.