GLOCK® 19 Compatible Pistol Build Kit w/ Pre-Assembled RMR Optic Cut Slide & Stainless Threaded Barrel

Description

GLOCK® 19 Compatible Pistol Build Kit [Pre-Assembled Slide w/ Stainless Threaded Barrel + Lower Parts Kit]

Finished your frame and ready to put it all together? This kit takes the slide work off your plate. You get a complete G19 slide with a stainless threaded barrel, American-made upper parts, stainless guide rod, polymer sights, and an RMR cover plate already installed, plus a complete lower parts kit to finish your frame.

Compatibility

Built for GLOCK® 19 Gen 3 compatible frames. The included lower parts kit fits GLOCK® 19 Gen 1-3 compatible frames, and the slide accepts GLOCK®-pattern sights and RMR-footprint optics.

Optics and RMR Cut Fitment

The RMR footprint is the most widely supported pistol optic cut out there, so you won’t be stuck hunting for adapter plates. Mount a Trijicon RMR, a Holosun (like the 507C X2), a Swampfox, or any other RMR-pattern red dot directly to the slide with the 6-32 tapped holes. Until then, the installed cover plate keeps the cut protected.

What’s Included:

Slide

The slide is machined from 416R stainless steel and ported along the top and diagonal sides. Front and rear serrations plus knurling give you a positive grip for press checks and manipulations.

• Platform: GLOCK® 19 Gen 3
• Caliber: 9mm
• Material: 416R Stainless Steel
• Style: ports on the top and diagonal sides
• Features: RMR optic cut w/ 6-32 tapped holes, front & rear serrations, knurling
• Optic Plate: RMR cover plate installed
• Sights: Polymer sights installed

Barrel

The pre-installed Optimus Series barrel is stainless steel with a threaded muzzle, ready for a compensator or muzzle device once you remove the thread protector.

• Caliber: 9mm
• Length: GLOCK® 19, threaded
• Series: Optimus
• Material: Stainless Steel
• Muzzle: Threaded, with thread protector

Pre-Installed Upper Parts:

• American-made upper parts kit (firing pin, firing pin spring and cups, firing pin safety and spring, extractor, extractor depressor plunger and spring, channel liner, spacer sleeve, cover plate)
• stainless guide rod assembly
• Polymer sights
• RMR cover plate

Frame Parts Kit Includes:

• Connector
• Slide Stop Release with Spring
• Locking Block Pin
• Magazine Release
• Magazine Release Spring
• Slide Lock
• Slide Lock Spring
• Trigger Housing Pin
• Trigger Housing with Ejector
• Trigger Pin
• Trigger Spring
• Trigger with Trigger Bar

This kit is not a firearm. This GLOCK® build kit includes a pre-assembled slide (slide, threaded barrel, guide rod with spring, sights, RMR cover plate and upper parts installed) and a frame parts kit. It does not include a frame, locking block, optic or magazine.

Sold Separately:

• Stripped Frame
• Pistol Red Dot
• Magazine

Already have a lower parts kit? The Complete GLOCK® 19 Compatible Pre-Assembled “Swoosh” Slide is available on its own.

---

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80% Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.