GLOCK® 19 Compatible Pistol Build Kit w/ Pre-Assembled RMR Optic Cut Slide & Stainless Threaded Barrel

Description

Pre-Assembled GLOCK® 19 Compatible Slide [Slide + Threaded Barrel + Upper Parts + Sights Installed]

This slide shows up complete and ready to drop onto your frame. It’s machined from 416R stainless steel with ports across the top and diagonal sides, front and rear serrations, and knurling for grip. A stainless threaded barrel, American-made upper parts kit, stainless guide rod, polymer sights, and an RMR cover plate are already installed.

Compatibility

Fits GLOCK® 19 Gen 3 compatible frames, including factory Gen 3 G19 pistols and compact 80% frames built to Gen 3 G19 specs. Accepts GLOCK®-pattern sights and RMR-footprint optics.

Optics and RMR Cut Fitment

The RMR footprint is the most widely supported pistol optic cut out there, so you won’t be stuck hunting for adapter plates. Mount a Trijicon RMR, a Holosun (like the 507C X2), a Swampfox, or any other RMR-pattern red dot directly to the slide with the 6-32 tapped holes. Until then, the installed cover plate keeps the cut protected.

What’s Included:

Slide

The slide is machined from 416R stainless steel and ported along the top and diagonal sides to cut weight and add a distinctive look. Front and rear serrations plus knurling give you a positive grip for press checks and manipulations.

• Platform: GLOCK® 19 Gen 3
• Caliber: 9mm
• Material: 416R Stainless Steel
• Style: ports on the top and diagonal sides
• Features: RMR optic cut w/ 6-32 tapped holes, front & rear serrations, knurling
• Optic Plate: RMR cover plate installed
• Sights: Polymer sights installed

Barrel

The pre-installed Optimus Series barrel is stainless steel with a threaded muzzle, ready for a compensator or muzzle device once you remove the thread protector.

• Caliber: 9mm
• Length: GLOCK® 19, threaded
• Series: Optimus
• Material: Stainless Steel
• Muzzle: Threaded, with thread protector

Pre-Installed Upper Parts:

• American-made upper parts kit (firing pin, firing pin spring and cups, firing pin safety and spring, extractor, extractor depressor plunger and spring, channel liner, spacer sleeve, cover plate)
• Stainless guide rod assembly
• Polymer sights
• RMR cover plate

This slide is not a firearm. It does not include a frame, lower parts kit, optic or magazine.

Want everything to finish your build? The GLOCK® 19 Compatible Pistol Build Kit with this slide adds a complete lower parts kit.

---

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80% Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.