Still building on a P80 (Polymer80) frame? Polymer80 frames are out of production, but we sold tens of thousands of them. Everything below fits the P80 frames our customers already own: slides, complete slide kits, lower parts kits, barrels, triggers, sights and magazines. Match your frame to its GLOCK® model, then shop that model’s parts.
| P80 frame | Takes GLOCK® parts for | Size |
|---|---|---|
| PF940C | G19 (also G23, G32, G38) | Compact |
| PF940v2 | G17 (also G22, G24, G31, G34, G35) | Full size |
| PF940SC | G26 (also G27, G33) | Subcompact |
| PF9SS | G43 | Single stack |
| PF45 | G21 (also G20) | Full size, large frame |
P80 frames use Gen 3 GLOCK® parts and need a locking block, which isn’t included in our lower parts kits.
We no longer sell P80 frames. The G80 is the Glock-compatible frame that replaced it: a steel receiver with the locking block and slide rails built in, a swappable grip module, and it takes the same Gen 3 G19 slides and G19 lower parts kit. See P80 vs G80 for the full comparison.
G80 Next Build Kit [Receiver + Grip] Already have a jig from your first build? This one’s for repeat builders — just the receiver and grip module, so you’re not paying for a jig you already own. Same steel FCU, same drop-in ready grip, same quality, at a price that makes your second build (or…
G80 Polymer Jig Build Kit [Receiver + Grip + Polymer Jig] Everything you need to go from raw steel to finished FCU, in one box. The G80 Build Kit pairs the unfinished receiver with the polymer clamshell jig and a grip module — all engineered to work together, so you’re not chasing down compatibility issues…
G80 Unfinished Receiver with Pins and Slide Lock Spring This is where your build starts. The G80 Unfinished Receiver is a precision-machined steel fire control unit — locking block, trigger housing, and slide rails cut from one solid piece of heat-treated 4140 steel giving it extra strength and reliability over the 80% polymer frames of…
G80 Grip Module Holster-ready and built for feel, the G80 Grip Module delivers proven GLOCK® G19 Gen3 ergonomics in a sleek, purpose-built housing. Your G80 Receiver drops straight in through the standard front and rear pins, no special tools needed, and the grip runs standard GLOCK® Compact magazines across 9mm, .40 S&W, and .357 SIG….
Showing 65–77 of 77 resultsSorted by popularity
GLOCK® 19 compatible RMR optic cut slide build kit Upgrade your G19 Gen 3 pistol with a slide kit that’s ready for Trijicon, Holoson, or another RMR compatible sight. This kit comes with everything you need to assemble your custom slide giving your pistol a fresh new look. Select a threaded barrel so you can…
Upgrade your G43 with stainless hardware. Thanks to its 416R stainless barrel, this custom black powder coated and vented slide assembly provides weight reduction and increased accuracy for your factory GLOCK® 43! Choose whether your barrel’s left with a bare, polished finish, or grab one with a satin black coating. The LFA Elite G43 Slide…
LF19 Elite Black G19 slide: Sleek, subtle, ready for a red dot. The easiest way to give your G19 frame a fresh new look is with a custom slide and barrel kit. This GLOCK® 19 compatible kit provides a sleek, lightweight slide complete with a black cerakote finish. It’s pre-cut for an RMR optic, opening…
LFA Elite G19 compatible 9mm slide w/ RMR optic cut This GLOCK® 19-compatible slide features plenty of upgrades over your typical OEM-spec slide. Forged from high-strength 416R stainless and heat-treated before receiving a strong and durable matte black Cerakote finish. This slide’s made to withstand thousands of rounds’ worth of abuse, and all the corrosion…
OEM fit and finish G19-compatible factory-style 9mm slide Finish your G19-compatible build or upgrade your current Gen 1 to 3 GLOCK® 19 pistol. It functions as reliably as an OEM slide, because it meets OEM specs. This incredibly tough, ceramic-like finish provides unparalleled abrasion and scratch resistance. That means your slide will continue looking great,…
Pre-Assembled GLOCK® 19 Compatible RMR Slide [Slide + Barrel + Upper Parts Installed] Skip the punches and the channel liner tool. This G19 slide shows up fully assembled, with a Gen 3 upper parts kit installed and a polygonal-rifled, Black Nitride barrel already in place, so all that’s left is adding sights and dropping it…
Custom G17 9mm Slide — RMR Cut & Black Cerakote Finish Boost your G17’s accuracy and control with this custom stainless steel slide. Features a precision RMR optic cut for immediate red-dot mounting and an Elite Series Black Cerakote finish for extreme wear and corrosion protection. Upgraded angled front and rear serrations ensure positive grip…
Gen 3 GLOCK® 19 compatible. RMR optic cut. Front & rear serrated. Elite series cerakote. Complete your Gen 3 G19 compatible build, or upgrade your stock GLOCK® 19! This custom-machined slide features an RMR optic cut for better target acquisition and improved accuracy. With an Elite Series Black Cerakote finish to improve wear and corrosion…
Pre-Assembled GLOCK® 19 Compatible Slide [Slide + Threaded Barrel + Upper Parts + Sights Installed] This slide shows up complete and ready to drop onto your frame. It’s machined from 416R stainless steel with ports across the top and diagonal sides, front and rear serrations, and knurling for grip. A stainless threaded barrel, American-made upper…
A drop-in stainless steel rear rail that cures a sticky, gummy slide on your Polymer80 PF45. If your PF45 slide drags or hangs up as it cycles, the rear rails are a common place to look. The ROOK Tactical Rear Rail System is machined from billet 17-4 stainless steel, giving the slide a precise, consistent…
G17 Compatible Slide Kit with Elite Series RMR Optic Ready Slide Tired of running a boring factory slide on your G17 frame? Upgrade your slide with this LFA Elite GLOCK® 17 Compatible slide kit. Top and side cutouts with front and rear serrations make this slide lightweight and easy to handle. Forged from high-strength 416R stainless…
G17 Compatible Elite Series RMR Optic Cut Slide Upgrade your Glock® 17 with this elite series optic cut slide. Top and side cutouts with front and rear serrations make this slide lightweight and easy to handle. Forged from high-strength 416R stainless steel billet and heat-treated before receiving a Black Cerakote finish. This slide is made…
This step-by-step downloadable guide describes how to assmble a glock slide. We’re putting together a GLOCK 19 slide using one of our GLOCK build kits. These instructions are applicable for other slides, too, like the G17 or G43. How do you get your download? ***You can download your digital purchases by clicking the links on…
Do you still sell P80 frames? No. Polymer80 frames are out of production. For a new build, see the G80.
Will a GLOCK®-compatible slide fit my P80? Yes, if it matches your frame’s model and is Gen 3 pattern. A PF940C takes a G19 slide, a PF940v2 a G17 slide, and a PF9SS a G43 slide.
Which lower parts kit do I need? The kit for your frame’s GLOCK® model: G19 for the PF940C, G17 for the PF940v2 and G43 for the PF9SS. See GLOCK® lower parts kits.
Do I need a locking block? Yes. P80 frames need a locking block, and our lower parts kits don’t include one.
Do these parts also fit the G80? Most do. Gen 3 G19 slides, complete slide kits and the G19 lower parts kit fit the G80, which has its locking block built in.
Looking for a Polymer80 AR-15 lower? Those are discontinued too. See our aluminum AR-15 80% lowers.
Guides: 80% Frame Compatibility Guide · P80 vs Glock Frames · P80 vs G80
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80% Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At 80-Lower.com, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.
